Clinoform architecture and along‐strike facies variability through an exhumed erosional to accretionary basin margin transition     

Miquel Poyatos‐Mor  George D. Jones  Rufus L. Brunt  Daniel E. Tek  David M. Hodgson  Stephen S. Flint 《Basin Research》2019,31(5):920-947

Exhumed basin margin‐scale clinothems provide important archives for understanding process interactions and reconstructing the physiography of sedimentary basins. However, studies of coeval shelf through slope to basin‐floor deposits are rarely documented, mainly due to outcrop or subsurface dataset limitations. Unit G from the Laingsburg depocentre (Karoo Basin, South Africa) is a rare example of a complete basin margin scale clinothem (>60 km long, 200 m‐high), with >10 km of depositional strike control, which allows a quasi‐3D study of a preserved shelf‐slope‐basin floor transition over a ca. 1,200 km² area. Sand‐prone, wave‐influenced topset deposits close to the shelf‐edge rollover zone can be physically mapped down dip for ca. 10 km as they thicken and transition into heterolithic foreset/slope deposits. These deposits progressively fine and thin over tens of km farther down dip into sand‐starved bottomset/basin‐floor deposits. Only a few km along strike, the coeval foreset/slope deposits are bypass‐dominated with incisional features interpreted as minor slope conduits/gullies. The margin here is steeper, more channelized and records a stepped profile with evidence of sand‐filled intraslope topography, a preserved base‐of‐slope transition zone and sand‐rich bottomset/basin‐floor deposits. Unit G is interpreted as part of a composite depositional sequence that records a change in basin margin style from an underlying incised slope with large sand‐rich basin‐floor fans to an overlying accretion‐dominated shelf with limited sand supply to the slope and basin floor. The change in margin style is accompanied with decreased clinoform height/slope and increased shelf width. This is interpreted to reflect a transition in subsidence style from regional sag, driven by dynamic topography/inherited basement configuration, to early foreland basin flexural loading. Results of this study caution against reconstructing basin margin successions from partial datasets without accounting for temporal and spatial physiographic changes, with potential implications on predictive basin evolution models.  相似文献   

Storm-induced turbidity currents on a sediment-starved shelf: Insight from direct monitoring and repeat seabed mapping of upslope migrating bedforms     

Alexandre Normandeau  Daniel Bourgault  Urs Neumeier  Patrick Lajeunesse  Guillaume St-Onge  Louis Gostiaux  Cédric Chavanne 《Sedimentology》2020,67(2):1045-1068

The monitoring of turbidity currents enables accurate internal structure and timing of these flows to be understood. Without monitoring, triggers of turbidity currents often remain hypothetical and are inferred from sedimentary structures of deposits and their age. In this study, the bottom currents within 20 m of the seabed in one of the Pointe-des-Monts (Gulf of St. Lawrence, eastern Canada) submarine canyons were monitored for two consecutive years using Acoustic Doppler Current Profilers. In addition, multibeam bathymetric surveys were carried out during deployment of the Acoustic Doppler Current Profilers and recovery operations. These new surveys, along with previous multibeam surveys carried out over the last decade, revealed that crescentic bedforms have migrated upslope by about 20 to 40 m since 2007, despite the limited supply of sediment on the shelf or river inflow in the region. During the winter of 2017, two turbidity currents with velocities reaching 0·5 m sec⁻¹ and 2·0 m sec⁻¹, respectively, were recorded and were responsible for the rapid (<1 min) upstream migration of crescentic bedforms measured between the autumn surveys of 2016 and 2017. The 200 kg (in water) mooring was also displaced 10 m down-canyon, up the stoss side of a bedform, suggesting that a dense basal layer could be driving the flow during the first minute of the event. Two other weaker turbidity currents with speeds <0·5 m sec⁻¹ occurred, but did not lead to any significant change on the seabed. These four turbidity currents coincided with strong and sustained wind speed >60 km h⁻¹ and higher than normal wave heights. Repeat seabed mapping suggests that the turbidity currents cannot be attributed to a canyon-wall slope failure. Rather, sustained windstorms triggered turbidity currents either by remobilizing limited volumes of sediment on the shelf or by resuspending sediment in the canyon head. Turbidity currents can thus be triggered when the sediment volume available is limited, likely by eroding and incorporating canyon thalweg sediment in the flow, thereby igniting the flow. This process appears to be particularly important for the generation of turbidity currents capable of eroding the lee side of upslope migrating bedforms in sediment-starved environments and might have wider implications for the activity of submarine canyons worldwide. In addition, this study suggests that a large external trigger (in this case storms) is required to initiate turbidity currents in sediment-starved environments, which contrasts with supply-dominated environments where turbidity currents are sometimes recorded without a clear triggering mechanism.  相似文献   

波浪作用下单桩基础周围海床液化机制研究   总被引：1，自引：1，他引：0  

隋倜倜  张弛  高玉峰  郑金海 《海洋工程》2018,36(4):88-96

建立波浪作用下单桩周围三维海床动力响应模型,考虑自重影响下的海床长时间固结过程。采用已有物理模型试验数据对模型进行验证,证实其具有较好的适用性。模拟波浪作用下单桩周围三维海床液化区域,通过定量分析超孔隙水压力和土体初始有效应力的变化,讨论单桩插入深度对海床液化的影响机制。研究表明,单桩插入深度发生变化时,土体初始有效应力对海床液化的影响要大于超孔隙水压力,且影响程度随着插入深度的增加而逐渐增大。  相似文献   

机载LiDAR地形特征信息快速提取     

刘智敏  杨安秀  宿殿鹏  刘盼 《大地测量与地球动力学》2018,38(11):1186-1190

为更有效地获取地形特征信息，提出一种机载LiDAR地形特征信息快速提取算法。首先，通过构建二次曲面拟合模型，建立实测LiDAR地形数据与拟合曲面的几何规则；然后，采用LM算法迭代参数寻优，获得最优化结果下的地形拟合参数，计算拟合时间及拟合精度；最后，以地形拟合模型为基础，进行地形特征信息的快速提取。通过机载LiDAR实测数据验证，当最优搜索半径为2 m时，地形曲面的拟合时间仅为0.02 s，RMSE仅为5.09 cm。该算法保证了地形特征信息提取效率和精度，能够有效满足机载LiDAR科学研究和工程应用的技术需求。  相似文献   

Modeling deepwater seabed steady-state thermal fields around buried pipeline including trenching and backfill effects     

《Computers and Geotechnics》2014

Deepwater pipelines are designed to transport mixtures of oil and gas, and their associated impurities at wellhead temperatures that can be in excess of 149 °C (∼300 °F or 422 K) while the external temperature maybe in the range of 5 °C (∼41 °F or 278 K). Depending on the circumstances these pipelines may be buried for physical protection or for additional thermal insulation using robotic trenching equipment. This results in a complex cut and backfill geometry in the seafloor in addition to altering the thermal properties of the backfill. A two-dimensional boundary element model was developed specifically to address to investigate the local steady-state thermal field in the near field of the pipeline. The model allows one to account for the complex geometries in the near field associated with this burial technique, site-specific multi-layered soil conditions and the seawater adjacent to the seafloor. A parametric study was preformed to evaluate effects of the thermal power loss, burial depth, pipe diameter and soil thermal conductivity on the thermal field in the near field of a buried pipeline. The numerical examples illustrate the influence of the backfill thermal property on the temperature at the pipe wall, that the pipe diameter controls the required output thermal power needed to maintain the desired pipe wall temperature, and the importance of pipeline burial depth on seabed temperature distribution above the pipeline.  相似文献   

Numerical modeling investigation on turbulent oscillatory flow over a plane rough bed composed by randomly arrayed particles   总被引：1，自引：0，他引：1  

ZHOU Zhibo  ZHANG Jinfeng  ZHANG Qinghe  LIU Run 《海洋学报(英文版)》2018,37(7):62-68

A three-dimensional numerical model is established to simulate the turbulent oscillatory boundary layer over a fixed and rough bed composed by randomly arrayed solid spheres based on the lattice Boltzmann method and the large eddy simulation model.The equivalent roughness height,the location of the theoretical bed and the time variation of the friction velocity are investigated using the log-fit method.The time series of turbulent intensity and Reynolds stress are also investigated.The equivalent roughness height of cases with Reynolds numbers of 1×10~4–6×10~4 is approximately 2.81 d(grain size).The time variation of the friction velocity in an oscillatory cycle exhibits sinusoidal-like behavior.The friction factor depends on the relative roughness in the rough turbulent regime,and the pattern of solid particles arrayed as the rough bed in the numerical simulations has no obvious effect on the friction factor.  相似文献   

地表组合粗糙度不确定性引起的SAR反演土壤水分的不确定性分析     

陈鲁皖  韩玲  王文娟  秦小宝 《地球信息科学学报》2018,20(1):108-118

地表粗糙度的不确定性是引起SAR土壤水分反演结果不确定性的主要因素,现有研究大多着重于研究单个粗糙度参数（主要是相关长度）的不确定性,直接研究地表组合粗糙度不确定性的较少。本文使用偏度、峰度和四分位距3个指标来量化不确定性,通过在组合粗糙度中加入不同量级高斯噪声进行随机扰动的方法,研究组合粗糙度不确定性在反演过程中的传递,并对反演土壤水分的不确定性进行定量分析。进一步研究反演土壤水分的均方根误差对组合粗糙度不同比例误差范围的响应特征,得到满足反演精度要求的组合粗糙度误差控制范围。样区的实验分析结果表明：组合粗糙度高斯噪声标准差在0-0.045之间时,峰度取值从-0.1984到1.2501,偏度取值从0.0191到0.6791,四分位距取值从0.0018到0.0167,3个量化指标都随组合粗糙度高斯噪声量级的增大而增大,土壤水分反演值有集中在众数附近的趋势,土壤水分低估倾向比高估倾向更明显;本文提出的组合粗糙度误差控制范围可满足反演精度要求,误差控制范围与入射角负相关。  相似文献   

“数字海底”--海底数据集成管理与可视化研究     

肖鹏  王悦东  李安龙 《海洋信息》2020,35(1):40-45,51

针对目前"数字海底"建设中存在海底调查数据集成管理与三维可视化表达不足等问题,本文采用GIS技术,以黄河水下三角洲埕北海域为研究对象,利用地理空间数据集成理论与三维建模方法,建立了埕北海域三维海底空间数据库,实现了研究区域地形数据、地层数据、钻孔数据、表层沉积物数据的有效组织管理与可视化,并在此基础上,采用ArcGIS Engine 10.0,结合.NET平台,在Visual Studio 2010开发环境下,利用C#语言进行了二次开发,实现了基于C/S (Client/Server)架构的三维海底虚拟仿真系统的开发,设计了一套面向埕北海域的三维海底虚拟仿真原型系统。  相似文献   

甘肃省肃南县桦树沟铁铜矿床地质特征及成矿模式     

李生全 《地质与勘探》2018,54(S1):1383-1391

甘肃北祁连西段桦树沟铁铜矿床是西北地区一个非常重要的铁铜矿床,对其地质特征及成矿模式的研究,将会对研究该成矿带铁铜矿床的成矿模式具有深远意义。通过大量的工作,认为桦树沟铁铜矿床为产于长城系上岩组的一套陆源碎屑岩夹碳酸沉积建造的同生海底喷流沉积矿床。铁矿体控矿构造主要是区域褶皱带,主要赋存于长城系上岩组的含铁细碎屑—粘土岩建造中,具体岩性为千枚岩。铜矿体的产出明显受后期韧性剪切带和层间滑动带共同控制,主要矿石类型有含铁碧玉岩型和蚀变千枚岩型两种。  相似文献   

Impact of terrain complexity on the turbulence drag coefficient: A case study from the Indian Himalayan region     

《Dynamics of Atmospheres and Oceans》2021

The aerodynamic drag coefficient (C_D) is conjectured to change (or remains almost uniform) with the horizontal wind speed (U) over a flexible (or fixed) surface element, which is represented with the surface roughness (z₀). This conjecture is tested for the near neutral atmospheric turbulence (i.e. when surface stability z/L is almost equal to 0, where z is the measurement height and L is Obukhov length) of monsoon and winter season at an on-slope and a ridge-top site in the Indian Himalaya, wherein the ridge-top site is associated with a higher degree of sensitivity to the roughness element and terrain attributes. This hypothesis is successfully verified for two conditions, (i) the monsoon period observations of ridge-top site are found to have higher z₀ due to vegetative growth than the winter period for flows having similar terrain signature, and (ii) the monsoon and winter period observations of on-slope site are noted to have similar z₀ for flows having signature of steep terrain. Subsequently, constants (i.e. a and b) of the power-law relationships between C_D and U (i.e. C_D = aU^b), as a function of z₀, are optimized. It is noted that the relationship between C_D and U has higher sensitivity towards the terrain slope than the vegetative growth.  相似文献